INVENTORY

4" HEINRICH MUELLER SWAGER

Type
Swagers

Model
UR5-4DD-24H

Stock #
14008

Year
1996

Equipped With

MODEL #: UR5-4DD-24H

SERIAL #: 5164


AGE: 1996
 
MODEL: UR5-4-DD-24H
 
SPECIFICATIONS:
This is a Single Station Swaging Machine
 
This Machine has Both Internal Rotating Spindle and Outer
 
Roller Cage Counter Rotating Ring
 
Capacity:
Bars: 5.0mm to 30mm
Tubes: 5.0mm to 60mm
 
Swaging Dies: 50 x 55 x 120mm (w x h x l)
This Machine can:
1.) Plunge Feed
2.) Infeed Swage
3.) Combination Plunge/Infeed Swaging
Also Can Swage Over a Mandrel, Hydraulic Powered Rear In
 
Feed of Mandrel/Extraction
Stroke Frequency: 1830 RPM
Spindle Rotation: 120 RPM
Outer Ring Rotation: 200 RPM
 
This is a Four Die Swager with Wedge Type Collapsing System
 
Allowing Plunging Into the Center of the Part. It Also
 
has a 500 mm Stroke Hydraulic Feed System with Hydraulic
 
Part Clamping. This Machine can also be Used to Swage
 
Internal Linear Forms such as Splines inside of Tubing.
 
 
EQUIPPED WITH: Interchangeable 4-Die Swaging Head UR5-4DD-A-3/1
Mandrel & Pusher Device UR5-4DD-N1-05-300
Hyd. Feed Sys. 24H-4050-03-100
Hyd. Clamping Jaw 24H-4005-01-200 (40mm Piston)
w/Rotating Stop 24H-21-200 & Workpiece
Orientation System
Mandrel Device 24H-4055-00-600 on Feed Slide
Feeder Slide Lock Device 24H-5025-00-800
Complete Control System w/Operator Control
 
Pedestal
Siemens Controls
Sound Enclosure Room Type
Many Spares
 
Wired for: 460/3/60, 80 Amp
Control Voltage: 120 & 24 Volt DC
 
Motor Data: 8.6 w, 18 kw plus Hyd. Pump
 
Loaded on Truck....................................Toledo, OH
**PHOTOS, MANUALS & DRAWINGS AVAILABLE